ph 09 5257888
   Our Suppliers
   Contact Us

Click For Closer look
Airlive FE-200DM 2-MegaPixel Ceiling Mount Fish Eye PoE IPCAM
  • Panoramic 360 Degrees Full View
  • H.264 & MJPEG Video Compression
  • 2 Megapixels Resolution at 1600 x 1200 Pixels
  • Micro SD Card Slot for Local Storage
  • Built-In Speaker & Microphone
  • Power-over-Ethernet 802.3af
  • Mechanical ICR
  • Advanced e-PTZ
Item Code : 3050
NZ $450.00+gst

Manufacturer Link:
New Page 2

irLive FE-200DM is a Fish Eye Panorama Network Dome Camera featured with 2 MegaPixel resolution, superior H.264-AVC performance and rich functions. It includes a fish-eye lens for 360° panoramic wide angle view without blind spot. It is very suitable to view a wide area with single camera such as hallway, store, and office without the need to install multiple cameras.

AirLive FE-200DM supports ceiling mount, wall mount, and table view applications.

Panoramic with 360° Surveillance Area and e-PTZ Function
AirLive FE-200DM enables you to monitor an area in high-resolution quality and without any blind spots. AirLive FE-200DM is a discrete camera. Mounted to a ceiling, it provides 360° surveillance covering the entire area. With just one camera, up to 4 virtual cameras can be displayed.
Using the e-PTZ function, all view angles can be adjusted by a mouse-click in a fast and intuitive way. Surveillance of an area has never been easier.
High Quality 2.0 MegaPixel Image
AirLive FE-200DM equips a 2.0 MegaPixel sensor for capturing the high quality video stream. With this sensor, AirLive FE-200DM is capable to capture images up to 1600 x 1200 pixels resolution. One of the most compelling advantages of MegaPixel surveillance systems is the ability to capture more details in a frame and at the same time not missing any finer details, that are useful for such as license plate identification and human recognition.
Micro SD Card Recording and 802.3af PoE
Memory card slot provides local storage function for saving image files to the specified SD card in your camera. This function can be enabled only when you insert the well-operative Micro SD/SDHC card to the camera. The camera has 802.3af PoE port so you can install it away from the power source.
IR-CUT Removable (ICR)
AirLive FE-200DM equips with ICR. IR-CUT Removable is a gear which will adjust the IR filter for adapting the light condition in the environment. With ICR, AirLive FE-200DM can be used for most of indoor locations.
Support Built-in Microphone and Speaker
AirLive FE-200DM has the built-in microphone and speaker, so a user can use two-way audio function without external microphone and speaker.
64-Channel Recording Software and IP Wizard
The AirLive FE-200DM comes with free 64-channel recording software that provides video recording and live view function. In addition, the recording software even provides camera tampering detection for someone tries to move or block the camera. We also include the IP Wizard Utility that can search and configure AirLive IP Cameras and the wireless Access Points.
APPS for Android and iOS
AirLive has worked with IPCAM Viewer developer to add support for AirLive IPCAM. So you can view
multiple AirLive cameras using Android device, iPhone, or iPad. For more information about Android or
iOS apps, please visit the FAQ page.
Camera Type
  - Indoor Dome Type
Image Sensor
  - 1/3" 2Mega CMOS image sensor
Sensor Resolution
  - 1600x1200
Lens Type
  - Board Lens
  - 1.25 mm, F= 2.0
Night Vision
  - Yes
Minimum Illumination
  - 1.5 LUX
Mechanical IR-Cut Filter
  - Yes
Viewing Angle
  - FOV=185°(D/H/V)
Pan/Tile Control
  - E-PTZ
Video Compression
  - H.264 MJPEG
Video Profile
  - 8
Resolution and Frame Rate
  - 15FPS @ 1600 x 1200 (4:3)
  - 15FPS @800 x 600 (4:3)
  - 15FPS @ 640 x 480 (4:3)
  - 30FPS @ 1280 x 720 (16:9)
  - 30FPS @ 800 x 450(16:9)
  - 30FPS @ 720 x 405 (16:9)
  - 30FPS @ 640 x 360 (16:9)
  - Multi-profile streaming
  - Streaming over UDP, TCP, or HTTP
  - M-JPEG streaming over HTTP (for non IE browser)
  - 3GPP mobile view
  - Configurable frame rate and bandwidth
  - Support both CBR and VBR
Image Processing
  - AE, AWB
  - Color, brightness, sharpness, contrast, Hue
  - Text, time and date OSD
Digital Zoom
  - 10X
Audio Encoder
  - RTSP: G.711 64kbps, ACC
  - 3GPP: AMR
Audio Streaming
  - Two-way
Audio Input/Output
  - speaker & microphone port and Built-in microphone & sperker
  - One RJ45 Port; IEEE 802.3u Compliant 10/100 Mbps Fast Ethernet with Auto-MDIX
  - IEEE802.3af
Supported Protocols
  - Password protection
  - IP filter
  - Up to 20 simultaneous users
LED and Button
Power LED
  - Amber Color
Link/Act. LED
  - Green Color
Reset Button
  - Reboot and Factory Default (Push and Hold default button then plug in power)
Network Processor
  - DSP Base
System ROM
  - 256Mbyte NAND Flash
System RAM
  - 128Mbyte DDR SDRAM
Power Supply
  - DC12V
Power Consumption
  - 3 Watts Max.
  - RJ-45 10BaseT/100BaseTX
  - 12V DC power jack
  - Speaker and Microphone jack
  - DIDO
  - Reset button
  - Operation: Temp: 0℃ ~ 50℃ Humidity: 20% ~ 80% non-condensing
  - Storage: Temp: -15℃ ~ 60℃ Humidity: 0% ~ 90% non-condensing
SD card slot
  - Micro SD
  - HxWxD:141x141x115 (φ)mm
System Integration
  - Campro Express 64,Campro Professional
  - Search & Installation-IP Wizard II
Event Triggers
  - Motion detection
  - External input via DI interface
Motion Detection
  - 10
Event handler
  - FTP file upload
  - E-mail alert
  - HTTP, and TCP notification
  - DO (digital output) alarm
  - Yes
Application Programming Interface
  - Open API for software integration
  - SDK
Video Buffer
  -  Pre- and post- alarm buffering
Alarm Triggers
  - Intelligent video motion detection and external input
Alarm Events
  - File upload via FTP, email, SD card
  - Notification via email, HTTP, and TCP
  - External output activation
  - Audio alerting output
continuous Recording
  - Yes
Viewing System
  - Windows® XP, Vista, 7
  - IE 6.0 or later, Firefox 2.0 or later, Safari
Cell Phone
  - With 3GPP player
Video Player
  - VLC, Quick Time, Real Player, Core Player
12 months return to base

p.s :
    Imaging Technology provides a one year parts and labour warranty on hardware except consumable parts (such as lamp, ink cartridge and Scanner Pad Assy) from the date which the equipment was invoiced. This warranty does not cover the call charges and delivery costs associated with replacing faulty hardware.
    Imaging Technology cannot be liable for incidental or consequential damage arising from the sale or use of goods supplied by Imaging Technology. Such damages include, but not limited to, costs of removal and reinstallation of goods, costs of testing, loss of goodwill, lost of profit, or loss of use .
    Where the the product is acquired for the purpose of business use(subject to Fair Trading Act) then the Consumer Guarantees Act 1993 shall not apply.

    All prices exclude freight & GST and are subject to change without prior notice.
    Imaging Technology accepts no liability for any Errors and/or data omissions.
    Photographs, pictures or graphics used are indicative only.

Home   Our Suppliers   Support   Contact Us